good work Sam looks good. All the difficult parts of the build are done so you are on the home stretch now !
Are you leaving the ferrules in while putting clear coats on ?
They should fit pretty tight in the hole
good work Sam looks good. All the difficult parts of the build are done so you are on the home stretch now !
Are you leaving the ferrules in while putting clear coats on ?
They should fit pretty tight in the hole
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I'll take them out for the clear coats. Right now they're snug. They're 10.5mm and I used a 10.5mm bit. The strings will hold them in. If there's any chance they'll fall out after the clear coat is on then I can put a dab of something in there to hold them that won't be too hard to crack if they ever had to come back out.Originally Posted by wokkaboy
- Sam
IB-5 - was finished, considering re-finishing body
IB-6S - done.
JR-1M - dressing frets and electronics build
ST-1 - still wondering how to install a tremelo
Telebass - non-PBG from parts buiild - painting body
Posting Permissions
Reply With Quote