Hi all, sorry for the double up on posts but I couldn't fit all the photos into one.
I have also noticed that when I place the neck into the pocket, the fretboard sits significantly proud of the body (approx 10mm) which is a little worrying as I want the floyd rose to sit flush with the body for a low action setup. There is also a visible gap between the neck heel and the inside of the pocket. I'm not too worried about this gap though, as I'm sure it would give me some wiggle room when setting up the scale length.
I have compared the mock build PBG-2 to one of my Jackson FR guitars which shows 10mm to the strings from the body. All of my fixed bridge bridge guitars sit a lot lower too.
Should I give the under side of the neck heel or pocket a light sand to reduce the height?
Reply With Quote