I've never glued veneer onto a curved top such as a ST-1. You may have to wedge something in between the top sheet and the veneer to hold it down onto the elbow cut.
In the past I haven't done any preparation on the front. Just make sure the surface is clean before you apply the kwik grip
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote