yeah ok cool, I presume you need a bit past the nut and a bit past the 24th fret.
I'll check on Gavmiesters distance nut to 24th fret
EDIT nut to 24th fret is 545mm so I'd think you would allow 15mm past 24th fret and at least 20mm north of the nut so think you would need around 585mm long fingerboard to be safe
Last edited by wokkaboy; 20-08-2015 at 03:48 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote