Results 1 to 10 of 27

Thread: Jointing curves accurately???

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #6
    Banned bargeloobs's Avatar
    Join Date
    Mar 2014
    Posts
    1,700
    Quote Originally Posted by dingobass View Post
    Its really quite easy.
    Template is the key. You only need one as you simply flip it over to route the opposing curve.

    The only thing you really need to be aware of is that both chunks of tree have equalised for at least six months...
    Otherwise you will have them moving at different rates and that is a pain in the joint
    Man, that didn't even occur to me, awesome. It looks like my router with the stuck bit is still under warranty too so hopefully once I get that sorted I will definitely give this a crack. Cheers DB;-)

    EDIT: when you say "equalize", is that after you cut the curves?
    Last edited by bargeloobs; 06-08-2015 at 08:51 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •