The TL-1 looks great Aridas. Is that one of those bizarre travel guitars hanging on the wall?
The TL-1 looks great Aridas. Is that one of those bizarre travel guitars hanging on the wall?
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
The AlohaMatic
Here is my build of a Gr-1sf in flat black with satin finish. Stock parts except one balance pot and shielded wire, with WierdBits custom wiring schematic: pickup selector, master tone, pickup balance pot, and master volume. It plays great and is almost as loud as a regular acoustic guitar. Thankfully the wiring is perfectly quiet with no hum. My one finish complaint was not having the exact shade of off white to match the binding (mine is slightly more white as seen on the truss rod cover) but overall it was the guitar I set out to make. Thanks to the forum for advice and encouragement!
Aloha, Jeff
nice one Jeff you really finished this build nicely. Well done with the setup and wiring as well ! Very strong contender for sure
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
dude! that GR-1sf is stunning, give that man the medal right now!
Hello, this is my first post and entry into the GOTM. I have been building this strat in between beers on Friday nights with the boys at 4D Guitars ! Thanks Wokkaboy and Wayne. Its a standard kit with Tarkine Green stain. Ive gone for a relic worn look inspired by Francis Rossi from Status Quo who has a 50's telecaster with a strat pick up configuration. It also features Francis Rossi's trademark hole drilled straight thru the body ( which he apparently did back in the day to help prevent his guitar lead from pulling out of the jack) The boys at 4D have got me hooked into this guitar building thing and im on my second build but have lost track of the beers !
![]()
well done Rozza for a first build you really excelled and learnt so much. Was good fun guiding you through the build. You got the most out of the kit. Many more great builds to come from you no doubt
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Looks great Rozza! That tarkine green looks awesome with the black in the grain. Love the headstock shape too. Well done!
cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/
This is my entry STA-1M tobacco burst. Finished this build March 2014 but haven't had a chance to enter it. It looks a bit similar to GOTM July 2014 but this one has a maple neck.
Gold hardware upgrade and the standard camphor veneer on the headstock. Stained in FW jarrah and Dingotone Outback Sunset.
Was going to enter the Tarkine green STA-1 but didn't want two green strats entered !
Last edited by wokkaboy; 26-07-2015 at 12:05 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in