cool jig and pretty basic
Stan's LP Build for my Sister: http://www.buildyourownguitar.com.au...ead.php?t=3146
Benson Pickup Strat mod: http://www.buildyourownguitar.com.au...ead.php?t=5229
Epiphone LP headstock fix: http://www.buildyourownguitar.com.au...ead.php?t=3410
Martin Backpacker Repair: http://www.buildyourownguitar.com.au...?t=5038&page=3
'57 Harmony Jazz guitar project: http://www.buildyourownguitar.com.au...ead.php?t=2972
cheers Kimball, I'm going to make one of these, looks pretty easy and should have all the materials at home !
great side project !
Why pay over $160 plus postage for a Stewmac one !
http://www.stewmac.com/Luthier_Tools...ref_currency=F
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Have fun Wokka im building one too
yeah ok KB, sounds good, please report how its going on this thread.
I hope to start Friday or Saturday
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I might as well join the bandwagon and build one too...
I drew up what I interpreted the dimensions on CAD in metric, sorry the image is small, we really need to make this maximum file size to upload bigger than 97kb !
The tutorial doesn't say how big the wheels are so I've made them diameter 40mm. They say minimum 1.5 inches which is 38mm.
I'll have to see what hole saw sizes I have.
I've made the winder wheel (wheel with handle mounted to it) wider so the handle doesn't clash with the 2 fret bending wheels.
Might need another washer or nut so there's no clash. Closer it sits to the mounting board less the play will be.
I hope to make a start Friday so I'll keep you posted if these dimensions work.
The mounting board can be much smaller, but as long as its long enough to place in the vice and the handle can freely spin.
Also the wheel and board widths are nominal, see what scrap ply wood or pine you have lying around the workshop.
Last edited by wokkaboy; 18-06-2015 at 03:28 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
No reason why this wont work on Nickle fretwire but I can see it exploding if you tried to run Stainless fretwire through it...
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
We don't need a bigger file size to upload, just a proper way to link from a hosting site like photobucket.
That way the resized pic is displayed in the post and the full size on the hosting site when the pic is clicked, all of the other forums I am on work in this manner.
Would give much better resolution for build of the month as well.
I've done 25x25x1.6 mild steel RHS mild steel run through similar dies and 20x1.2 round mild steel when building the car, so the bits just need to be sized in suitable material so I don't see a major problem.Originally Posted by dingobass
Similar dies are used to bend windscreen surround in U section aluminium for the type of car in my avatar, I don't have a screen because it adds weight, slows the car down and has painful extra ADR requirements for registration
Posting Permissions
Reply With Quote
![[url=https://www.facebook.com/kellysgutiars]](image.php?u=1285&type=sigpic&dateline=1444110346)
