Hi Sargeant, the PBG necks are good value but don't think it will be wider than the neck you have so the only solution I see so the strings aren't too close to the fret ends is to find a bridge with narrower saddle spacings or use the bridge with narrow spacings
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Thanks for the replies so far. I've been unable to find a TOM bridge with 10mm spacings, everything seems to be 10.4 mm, anyone got any ideas on where I might find one or does anyone know the heel width, or the nut and 12th fret width, of the PBG bolt on necks?
Posting Permissions
Reply With Quote