I'd suggest for one of the wiring to make it p90 straight to output. Would sound amazing
I'd suggest for one of the wiring to make it p90 straight to output. Would sound amazing
Would be brighter than the 1meg pot!!! I would like an ultra bright guitar!!
Right now, I'm on the path of doing the master volume and dual tone controls for simplicity, but I'll see what Weirdy comes up with anyway. Also I plan to have a nice bevel on the body, 10mm in from the edge....
Sorry for the third post in a row, can't edit posts right now...
Anyway, with the 4 pole switch I have, it SHOULD be possible to have 2 different tone circuits? I want to have one tone control to be active when in positions 1, 3 and 5, but have the second tone control active in positions 2 and 4.
So looking at the switch, if I wire up the lower deck to be for one tone control, I should be able to use the upper deck as the second tone control???
Oh dear.... I have created a monster
Its great to see you super exctited by this build Pesty!
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
But then I'll grab some files and throw in an elbow carve along with a belly carve.... THEN I'll bevel the rest of the body, will be much more comfortable and can't slice my arms open!!!
Yes DB, you have created a monster
DB, super excited is an understatement. The guy lives and breathes talk of this build.Originally Posted by dingobass
Oh dear.... I have created a monster
Its great to see you super exctited by this build Pesty!
Sounds great your plans Pest. Keep the ideas coming and the axe coaches will comment !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Haha yeah Wokks, this build is very special to me! This thing is really starting to flesh out in my head now, I can really see how it will turn out, and it will be very damn cool!
I posted some rotary wirings on the wiring forum that I devised. Though I was using a single and a humbucker (Treating it as three single coils), so it might not be worth a lot to you.
Ok mario, I'll check it out later today!
Reply With Quote![[url=https://www.facebook.com/kellysgutiars]](image.php?s=a9ff5a41bf8451a08b0f68759c10ff8b&u=1285&type=sigpic&dateline=1444110346)
