Quote Originally Posted by wokkaboy View Post
nice one Dave so the output of the neck pup is pretty normal now ?
So is the humbucker being split by a push pull pot ? Sounds like there could be a problem with the pot or double check none of the solder joins are touching anything nearby the lugs
I wish it was that simple, both poles have individual vol pots and when the impedance is measured at the pots and the output jack I get the expected results with the relevant pots moving through their range and I know I am seeing the individual poles because they have 0.02 of an ohm between them. ( decent meter and quite a few years playing with electricity )

1. Turn the PB pup vol up and down and get the expected result.
2. Turn the Nth pole of the HB up and and down and get the expected result.
3. Turn the Sth pole of the HB up and get nothing
4. Bound PBass pup and Nth pole up and tone but not vol changes
5. Add Sth pole of HB pup and nothing changes

Very odd but we will get there in the end