Page 5 of 11 FirstFirst ... 3 4 5 6 7 ... LastLast
Results 41 to 50 of 108

Thread: Dingobursts- any dramas?

  1. #41
    Overlord of Music keloooe's Avatar
    Join Date
    Jan 2013
    Location
    Melbourne
    Posts
    3,162
    It's okay Andrew we are all willing to chip in, as long as you provide the power! By the way, Gav has setup the NSW branch of the NW, so we can just chuck you there, we even have transportation to and from the central NW!

  2. #42
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    only problem Andrew a regional Naughty Warehouse will have to have cameras everywhere so DB can watch and talk over the 10,000 watt speakers and play big brother hahah
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  3. #43
    Overlord of Music andrewdosborne's Avatar
    Join Date
    May 2014
    Location
    Sydney, NSW
    Posts
    2,751
    Tell you what, I'll build a pipe from here to WA to supply the home brew!
    Current Projects
    #Planning 5 String Bass

  4. #44
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    sounds great Andrew. Have you costed such a pipeline ? You might be able to tap into the Little Creatures line that comes from Geelong to Perth.
    Better make the pipe from NSW to Geelong minimum 500mm ID, we are pretty thirsty here in the west !
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  5. #45
    Overlord of Music andrewdosborne's Avatar
    Join Date
    May 2014
    Location
    Sydney, NSW
    Posts
    2,751
    I'm sure I can get some cheap piping from the Green Shed of Doom!
    Current Projects
    #Planning 5 String Bass

  6. #46
    Overlord of Music
    Join Date
    Aug 2012
    Location
    Brisvegas
    Posts
    3,356
    Quote Originally Posted by Bass Guy View Post
    This is the sort of thing I had in mind, finish-wise.

    Mmmm, dragonburst. Sounds keen.
    'As long as there's, you know, sex and drugs, I can do without the rock and roll.'

  7. #47
    GAStronomist stan's Avatar
    Join Date
    Aug 2013
    Location
    Geelong, Vic
    Posts
    5,290
    I'll ramp up the Geelong pumping station for the extra load...

  8. #48
    GAStronomist stan's Avatar
    Join Date
    Aug 2013
    Location
    Geelong, Vic
    Posts
    5,290
    potential finish would look amazing BG...

  9. #49
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Quote Originally Posted by stan View Post
    I'll ramp up the Geelong pumping station for the extra load...
    sounds good Stan, I can help design and draft the pump station with over 20 years experience.

    Best we overdesign it big time the rate the NW numbers are increasing
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  10. #50
    Overlord of Music andrewdosborne's Avatar
    Join Date
    May 2014
    Location
    Sydney, NSW
    Posts
    2,751
    Lets just build a micro brewery in the NW!
    Current Projects
    #Planning 5 String Bass

Page 5 of 11 FirstFirst ... 3 4 5 6 7 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •