Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16

Thread: Excited or what?

  1. #1
    Mentor Rabbitz's Avatar
    Join Date
    Apr 2015
    Location
    Barossa Valley, South Australia
    Posts
    770

    Excited or what?

    Hi All,

    Just got the email to say my LP-1M kit is on its way.

    (Thanks Adam - really quick service!)

    Ok a little about me.

    I have been in and around the music biz since 1981. Roadie, Instrument Tech (staging), Merch Biatch, all of that.

    Spent the first 20 years of being a tech knowing how to play one chord - then one of the guys I did a bit of work with decided it was time to learn how to play.

    Well I can play, but it would be best described as "crappy" but I enjoy it.

    Anyway I am off to clear some space on the workbench - actually I might just clear some room and build a new bench - this might take a while...

  2. #2
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    nice one Rabbitz, its always exciting knowing there is a kit on it's way.
    Clear some space for sure.
    Any idea what colours you may stain/paint the LP-1M and any hardware upgrades ?
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  3. #3
    Mentor Rabbitz's Avatar
    Join Date
    Apr 2015
    Location
    Barossa Valley, South Australia
    Posts
    770
    Hi wokkaboy,

    As this is a first attempt the hardware is standard for now. I'll build it first then see about changing it

    I've ordered the Coolangatta Gold Dingotone kit. I am too much of a newbie to risk ending up in the naughty room at the outset.

  4. #4
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    nice one, the website won't let me upload a pic but I built a LP-1M in coolangatta gold and it came out pretty good. Popped the flames with a black stain before the coolangatta gold stain. Also got a black hardware upgrade.
    Here's a link to the build diary, go to the last page
    http://www.buildyourownguitar.com.au...ht=coolangatta
    Last edited by wokkaboy; 20-04-2015 at 04:29 PM.
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  5. #5
    Mentor Rabbitz's Avatar
    Join Date
    Apr 2015
    Location
    Barossa Valley, South Australia
    Posts
    770
    Wow, that grain didn't 'pop' it exploded!

  6. #6
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    cheers Rabbitz.
    You can do the same with your kit. Have a look at page one. Put a coat of black stain and sand it back so just the flames are highlighted and then put the stain over it.
    Just remember the caps (veneer) is very thin so you can't sand it much
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  7. #7
    GAStronomist stan's Avatar
    Join Date
    Aug 2013
    Location
    Geelong, Vic
    Posts
    5,290
    Welcome Rabbitz, sounds like a cool project, keep us posted

  8. #8
    Overlord of Music Fretworn's Avatar
    Join Date
    May 2013
    Location
    Hornsby Area, Sydney, NSW
    Posts
    3,951
    Welcome Rabbitz! I grew up in Mount Colah, spent the first 22 years of my life there. My parents still live in the same house 23 years later on.
    Current:
    GTH-1

    Completed:
    AST-1FB
    First Act ME276 (resurrected curb-side find)
    ES-5V
    Scratchie lapsteel
    Custom ST-1 12 String
    JBA-4
    TL-1TB
    Scratch Lapsteel
    Meinl DIY Cajon
    Cigar Box lap steel

    Wishing:
    Baritone
    Open D/Standard Double 6 twin neck

  9. #9
    Mentor Rabbitz's Avatar
    Join Date
    Apr 2015
    Location
    Barossa Valley, South Australia
    Posts
    770
    Hey Fretworn - glad there is a local around about the place.

    I am near the footy field.

  10. #10
    Mentor Rabbitz's Avatar
    Join Date
    Apr 2015
    Location
    Barossa Valley, South Australia
    Posts
    770
    Crushed.

    I know it has to get here from the other side of the continent.

    An Australia Post contractor pulled onto the drive this morning. (I am at home dealing with storm damage and flooding - a whole other story)

    The guy jumped out grabbed a box and headed towards the door. I am thinking "alright!!!!!!!!!!!!! "

    He gets to the patio where we have (another) house number, he stops, checks his electronic do-hickey, does an about turn and heads into next door.

    I am crushed.


Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •