Hey Barge. I measured a current same kit and nut to 12th fret 323mm. With Bridge butt up to the guard and saddle settings out of the box 12th fret to low E saddle was 325mm and high E was 323mm so spot on. Have plenty of room to move the saddles further away
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yeah well I'm looking at 330 from 12th to saddle so there goes my new bridge. Just to top it off I went to enlarge the cavity last night only to discover I can't get the rabbiting bit out the router GRRRRRRR.Originally Posted by wokkaboy
I didn't even bother checking scale length when I first un-boxed it thinking everything should be cool, but this has turned out to be a real prick this far along in the build.
Posting Permissions
