I have gone as far as I can with the staining and clear finishing.
I thought the soldering of the electrics was the next step but I watched the Guitar Build guide and they said that the neck is attached first.
Is this right and, if so, could I get a couple of hints?
I have watched the Attaching the neck guide but I watched another one and it added strings diagonally and measured the distances and the mid point etc.
The other video guide just says to locate the neck and install the 2 E strings and make sure they are parallel and aligned and to the neck and check the measurement to the twelfth thret from the nut and bridge (I think!)
Reply With Quote