Results 1 to 10 of 28

Thread: EXA-1 Build

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Thanks Wokka, its red mahogany colourtone stain. I've masked off the heel of the neck to make sure no stain/ tru oil got into where it will be glued. I'll check those distances when the oil dries. Thanks for the heads up !!

  2. #2
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Quote Originally Posted by Gibsonite View Post
    Thanks Wokka, its red mahogany colourtone stain. I've masked off the heel of the neck to make sure no stain/ tru oil got into where it will be glued. I'll check those distances when the oil dries. Thanks for the heads up !!
    no worries, I had to chop about a 10mm notch out of the neck just before the 22nd fret as you can see in the picture attached.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	2014-10-26 23.54.20.jpg 
Views:	250 
Size:	79.4 KB 
ID:	2453  
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •