nice one DB looks great. So a break angle on F type, nice touch. Was the first blank you glued for the body or this neck ? Looks like the neck is one piece ?
enjoy your hard earned beers !
Did you cut the break angle with the bandsaw ?
nice one DB looks great. So a break angle on F type, nice touch. Was the first blank you glued for the body or this neck ? Looks like the neck is one piece ?
enjoy your hard earned beers !
Did you cut the break angle with the bandsaw ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
That was the body Woks, the neck is a one piece..
Yep, cut the break angle on the bandosaurus... 20mm blade installed..
With the right tools, holding tongue correctly whilst standing on one leg, you can do just about anything if you put your mind and 30+ years of stuffing around with timber to it
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
nice one DB, 20mm wide blade must be easier to cut straight lines. Whats your deadline about Wednesday to get it posted off in time ? Hope you sell the kit at the show, sure you will !
At least its just shape it, route body and roughly sand it and throw it in a box
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yhep, 20mm blade gives a nice square cut.
Rob is paying for the kit, think he wants to put it together after the show.
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
nice one DB it's sold before it begins ! Look forward to see it progress, don't forget to take photos of a mock build and of course you better post it - chances of Ads posting it to himself are very high !
Barge better pull his finger out, it's currently the Wok's and DB show on top of the Whats new page !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
thats looking nice, love seeing how the neck is done
Stan's LP Build for my Sister: http://www.buildyourownguitar.com.au...ead.php?t=3146
Benson Pickup Strat mod: http://www.buildyourownguitar.com.au...ead.php?t=5229
Epiphone LP headstock fix: http://www.buildyourownguitar.com.au...ead.php?t=3410
Martin Backpacker Repair: http://www.buildyourownguitar.com.au...?t=5038&page=3
'57 Harmony Jazz guitar project: http://www.buildyourownguitar.com.au...ead.php?t=2972
Very cool DB, another one of your awesome projects begins!
PK, I'm sure my Kelly's also came here around the same timeframe, if only my grandfather (who is also a Paul) could remember the rest of my family history...
Looking good DB
hey Barge for a little while yesterday arvo it was the DB and Woks show, was waiting for you to turn up and hijack a thread mate !
I'm off work today so I'll be too busy in the workshop and watching F1 to get online !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
hahaha, good to see you're keeping the show going Wokks, I was a bit busy on other things yesterday arv so wasn't at the puter much.Originally Posted by wokkaboy
Remember I mentioned I was having chainsaw issues, well I fixed it yesterday. I'd broken the cord a while back and rather than replace it I just wound it back on and tied a new knot. So what was happening was the piston wasn't completing it's full stroke, hence fuel pissing out the front...duh!!
Enjoy ya day off bro:-)
Posting Permissions
Reply With Quote