Is it some sort of press?
Is it some sort of press?
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
Gav's right it's a nut clamp. hence the recessed edge.
PK
Kellza
(PK)
"Jack of all trades, Master of None"
"You'll never ever know if you don't have a go"
https://www.facebook.com/PaulWKelly
Avatar Image is a "The headstock of my first scratchy"
Thar rounded front edge on the timber has something to do with it I reckon, but what...
Does the word "radius" come into the equation per chance?
Whatever it is, it sure is going to be handy for multiple jobs.
DB the bridge is there so you can run the 6 strings through to the nut slots to check the depth of the slots.
I still like my idea it's a device to wack Magpie fans hahah
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Bwahh. have you got anything to fix braces in my Epi Acoustic. :P
I'm about to build a couple of little wind out presses from a couple of 80 mm turnbuckles and some clamp knobs.
For a mirror I just bought a an A4 sheet of mirror that I'll cut into 3 70mm by 295 segments and use tape to hinge it so I can shove it in the sounf hole so I can see whats busted. Had the USB Borryscope in last night but could not get enough bend to actually have the lens far enough away to see what's wrong.
Oh the bridge is there so he can line up saddles.
PK
Kellza
(PK)
"Jack of all trades, Master of None"
"You'll never ever know if you don't have a go"
https://www.facebook.com/PaulWKelly
Avatar Image is a "The headstock of my first scratchy"
I can see this is messing with peeps heads
The bridge is there as a clamp to hold the irwin in place... It was just lying around so it got used for this job, saved stuffing around cutting and drilling a chunk of steel....
The radius on the block is purely for clearance.... But what is it clearing?
your not wrong there DB !
the radius of the base block is to have clearance for your nut files.
I said in an earlier comment the bridge was to hold down the clamp so I must be 10% correct ?
See my comment posted 4:26pm yesterday.
That bloody bridge threw everyone off !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in