Pabs could you cut the shape of the 2 x 1.5mm clear perspex sheets, drill the holes, then hold the 2 sheets together with the screws in the holes then put the bevel on ? not sure if the screw heads will be a problem
Pabs could you cut the shape of the 2 x 1.5mm clear perspex sheets, drill the holes, then hold the 2 sheets together with the screws in the holes then put the bevel on ? not sure if the screw heads will be a problem
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
