Results 1 to 10 of 21

Thread: ES3 "Sophie Rose"

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 20-01-2015, 01:03 PM #20
    wokkaboy
    wokkaboy is offline
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Dan, plans sound good.
    Start off with stain coats, I generally go onto intensifying coats when you are pretty happy with the depth of colour from the stain coats. The intensifying coats will do exactly that add a bit more colour intensity. Then put the clear coats on.
    Be sure to allow minimum 3-4 days between coats and DB always says thin coats are the best.
    The neck finish kits have their own clear/final coat but the body clear coats can go on the neck ok.
    Also be sure to shake the bottles thoroughly before applying
    Last edited by wokkaboy; 20-01-2015 at 01:05 PM.
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules