Quote Originally Posted by maxaxe View Post
This axe had better eventuate after all this attention.
The plan graphic is inspiring to say the least, so don't hold back Loobs.
Oh yeah, Woks - I might just try doing a mystery build - bwahahahah.
Orr she's definitely happening Maxy, I'm anticipating a Thursday delivery. I reckon I'll be hacking bits off that body before the bubble wrap's even taken off:-)
+1 for the mystery build idea too!
@Gav, hey cheers dude, all I gotta do now is not cock it up.

A couple of quick question for anyone out there in the know, I want to dye the flame cap black to highlight the figure before the DT goes down, the problem I've got is the veneer is only about 0.6 thick. Will the black take much sanding to get it back to where it needs to be without going right through the cap, any tips to avoid this?
Also what's the best way to mark out the cavity routs on the veneer so they line up pretty close to the body once stuck down?

Cheers guys.