good stuff Alan there's heaps of encouragement and inspiration in the forum.
Have you ordered 2 stain colours and are going to attempt a burst ?
this takes a bit of practice but sure with a practice on some scrap wood you can pull a nice burst off
good stuff Alan there's heaps of encouragement and inspiration in the forum.
Have you ordered 2 stain colours and are going to attempt a burst ?
this takes a bit of practice but sure with a practice on some scrap wood you can pull a nice burst off
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I have only ordered the Outback Sunset at this stage - I think this is going to be too light and not sure if extra coates will bring it up like yours.Originally Posted by wokkaboy
Yours seems to be lighter in the middle and darker outside and I am a little nervous choosing a darker color because I dont think DT have a darker color except a really 'blacky' sort of color which I don't think will work??
I would definitely like to try the burst but could you suggest a darker stain to use??
I have ordered the intensifier and finishing varnish (?) as well - hopefully you just put these over the stains creating the burst??
What is the wood that I would have to get to do a trial?? - sorry lots of questions......
Its exciting and scary at the same time.
Cheers,
Alan
Posting Permissions
Reply With Quote