No, I was serious, but would it be an acoustic bass, or with pickups? Sounds like it might be another project for you DB. What pickups? Scale length? Could be an interesting "exclusive" for PBG.
No, I was serious, but would it be an acoustic bass, or with pickups? Sounds like it might be another project for you DB. What pickups? Scale length? Could be an interesting "exclusive" for PBG.
Cheers,
Adam
adamboyle(at)pitbullguitars.com
Well just look at this...
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
It would have to be metal body, 34" scale and possibly with a piezo pup on board..Originally Posted by adam
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
Ok, I'll see what they can do.
Cheers,
Adam
adamboyle(at)pitbullguitars.com
I hope you've got the Stetson to go with that, DB!
Wait a minute ... that sounds like Rock and/or Roll!
SG-1 ... "Little Miss" finished in Flamenco Cherry Wudtone
TL-1A ... "Slugger" finished in Antique White Nitro
EX-1 ... "Metal God" finished in nickel-plate (work in progress)
ST-1A ... "Scrapper" stained and finished in linseed oil ... and with the "secret weapon"
GR-1SF ... "Rocker-billy" (just arrived, work in progress)
Hahahahahaha.... Sadly, yes i do.. Left over from my rodeo days
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
Oh, I just new it! ... with a fondness for an "upright resonator bass" I knew there had to be streak of Tex-Mex hiding below the surface there somewhere
Wait a minute ... that sounds like Rock and/or Roll!
SG-1 ... "Little Miss" finished in Flamenco Cherry Wudtone
TL-1A ... "Slugger" finished in Antique White Nitro
EX-1 ... "Metal God" finished in nickel-plate (work in progress)
ST-1A ... "Scrapper" stained and finished in linseed oil ... and with the "secret weapon"
GR-1SF ... "Rocker-billy" (just arrived, work in progress)
I'd be interested in a banjo for sure.
Banjo doesn't interest me, but a reso definitely does. Not that I would have the finances at the moment.
But the reso would have to be a biscuit bridge, not a spider bridge.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
I'd be keen on a metal resonator for sure, those things sound great amped up with slide.
DB get a resonator bass and it will resonate all the way down the hill !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote
