Page 8 of 10 FirstFirst ... 6 7 8 9 10 LastLast
Results 71 to 80 of 97

Thread: Where do you buy woods from?

  1. #71
    Yeah its really bright hey, not like metal bright, but not like punching nr pizza dough.

  2. #72
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    haha nice description. NR pizza dough is a short deep thud, just ask AJ !!

    you may be in luck then mate.
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  3. #73
    Fingers crossed. Hey have you got a DT product in a retail pack yet? I got bondi today, but in the pack was neck finishing instructions.

  4. #74
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    no haven't had written instructions about Dingotone but DB says apply the stain coat first, then the intensifying coat. Might as well use up all the stain coat in probably 2 or 3 sessions. Rub as much in as the timber will take and wipe off excess.
    He even said you can come back half an hour later and try rub more in. The first 2 coats are the most important so get heaps of colour in.
    Wait till you smell it !
    Last edited by wokkaboy; 18-11-2014 at 02:12 PM.
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  5. #75

    General opinion is treated pine. Lucky I planed with a mask on.

  6. #76

  7. #77
    Overlord of Music Fretworn's Avatar
    Join Date
    May 2013
    Location
    Hornsby Area, Sydney, NSW
    Posts
    3,951
    Quote Originally Posted by andrew View Post
    spalted pine anyone?
    Water damage?

  8. #78
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    I'd say so Fretty being underground for a long period of time.
    I'd use them to retain a small vege garden Andrew
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  9. #79
    This shite is driving me mental. One days it's bet your house on it treated pine, today there is no chance it's pine or treated. Balllllsssssssssss.

  10. #80
    Mentor vh2580's Avatar
    Join Date
    Aug 2013
    Location
    Cleveland Qld
    Posts
    1,183
    Andrew there is some interesting colouring in the timber. if it seems structuraly sound and has a nice knock have a crack at a dummy body. for $5 a length and a few hours of time you cant lose.
    May look really good stained regardless of what timber it is. I would use breathing protection regardless of treated or not seeing some of the crap ive seen down mines.
    Tony

Page 8 of 10 FirstFirst ... 6 7 8 9 10 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •