Yeah sweet, no reason why they wouldn't sell, they look amazing. Good luck man.
Yeah sweet, no reason why they wouldn't sell, they look amazing. Good luck man.
well done Andrew on the acoustics and Bman those rings and veneers look awesome.
I had a brainwave idea yesterday, had a slab of blackbutt and decided to make a small bar table for near the pizza oven, stained it in FW old baltic and its had a coat of tru oil. Hope to get another coat on later today. The slab of blackbutt cost me $140 from the wood show and I've cut off a 460mm long piece for a scratch build. It's one of the hardest timber I've cut so it will kill router bits and bandsaw blades pretty quickly !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
here's some daylight pics and got the top screwed into the frame
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Holy Crap dude that's awesome! I bet many a pizza and beer will be enjoyed on that.
cheers Andrew, just waiting for the weather to warm up and I'll be having lots of pizza and beer on the table. I had enough of the blackbutt slab left to make 2 matching stools, I built the first stool yesterday. I decided the timber is too hard for an axe body.
Believe it or not the stool seat has just been cleared so no red stain applied !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
looks awesome wokka!!
Stan's LP Build for my Sister: http://www.buildyourownguitar.com.au...ead.php?t=3146
Benson Pickup Strat mod: http://www.buildyourownguitar.com.au...ead.php?t=5229
Epiphone LP headstock fix: http://www.buildyourownguitar.com.au...ead.php?t=3410
Martin Backpacker Repair: http://www.buildyourownguitar.com.au...?t=5038&page=3
'57 Harmony Jazz guitar project: http://www.buildyourownguitar.com.au...ead.php?t=2972
cheers Stan. Just needs a few more coats of tru oil
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Lovin' that bar top Wokks, I bet she'll get a good workout:-)
Picked this pedal up on Gumtree, as new in the box, 200 big ones + free postage.
Pretty happy with that.
cheers Barge, good score on the FX pedal unit, great score !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Wokks - looks plenty big enough for a couple of pints and a jug - must have been planned that way!
Current builds:
GPB-4B: https://www.buildyourownguitar.com.a...548#post184548
Posting Permissions
Reply With Quote
