Thanks man!
looking good Andrew, this will be a beast once its finished
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Thanks guys. Any tips on how to line up the decals?
can you please take a photo of the decals you are applying Andrew ?
when you apply them you just need to line them up best you can by eye, unless someone has a better idea
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Sorry about the scrappy photo. The white ones go down first then the cream over the top.
so are these going on the headstock Andrew ?
So you putting down the white Walkertone on, then the cream goes directly ontop to give a 3D effect ?
Are they vinyl logos ?
Might have been easier to try get the 2 colours in the 1 logo, that will be a mission to line them up perfectly and you only got 3 goes !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Carefully! Lol. Good thing you got some spares dude. I hate those things./<\\/p>[]<\\/p>/Quote from andrew on July 22, 2014, 10:42
Thanks guys. Any tips on how to line up the decals?
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
They are water slides. I didn't know til after I paid the guy that they came in 2 parts. His instructions were to put the white down, let it set then put the cream over the top caus its translucent and will disappear over the black. Kind of scared. If it goes wrong I guess I can just stick with the white but had my heart set on a retro cream logo... On a silver burst explorer. Thought it'd look kind of different.
ok I've never put a water slide ontop of another. This will be much easier than lining up vinyl logos you only get one chance. Lightly spray the underside of the 2nd decal with water and you should be able to move it in place before it sets. Might be worth getting some advice from Andyport regarding a waterslide ontop of another.
You can buy blank waterslide paper and print your own logos if you can come up with the logo merged into one would be much easier
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Feeling a bit more relieved now. Only drama is that the logo is such a light cream colour that it'd be hard on a domestic printer that doesn't print white.
Posting Permissions
Reply With Quote