Page 2 of 2 FirstFirst 1 2
Results 11 to 19 of 19

Thread: TL-1TH cant get wiring right!

  1. #11
    Mentor
    Join Date
    Aug 2013
    Location
    Mackay
    Posts
    1,276
    I'm with Scott. Looks like it's all correct so it's a bit weird why there's no output. Follow Scott's hints and let us know.

  2. #12
    I think I may have found the problem... if I move the wire on the centre pole of the volume pot VERY slightly, I get a signal, although the soldered connection seems good... a faulty pot perhaps? Can anyone tell me the resistance of that pot, and I can buy another one to try? BTW I really appreciate the quick responses!

  3. #13
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    try resoldering the wire on the centre pole of the volume, by the sounds its not making a clean connection if you are getting a signal when you move the wire.
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  4. #14
    It could just be a dry joint, so try resoldering the connection on that cemtre lug first. If that still doesn't fix it then use a wire to short the centre lug with the left (blue wire) lug and see if that gives you full signal, if it does then you'll know it's the pot itself at fault. It should be a 500KA (log/audio taper) pot.
    Scott.

  5. #15
    Moderator dingobass's Avatar
    Join Date
    Sep 2012
    Location
    Perth
    Posts
    4,491
    OK... so scratch my previous mutterings....

    No need for you to buy a pot, if it is faulty we will replace it for free.

    Just shoot me an email to dingobass@pitbullguitars.com with your address and I will send one out to you

    There is always a workaround for glitches, mistakes and other Guitar building gremlins.....

  6. #16
    Thanks, I'll try re-soldering the connections this morning, if no good I'll email Dingobass... much appreciated

    Jim

  7. #17
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Jock if the resoldering of the centre volume lug doesn't help then do the test that Weirdbits suggested above posted July 16th 20:00. There's a chance another solder join may not be making a good connection and may not be a faulty pot.
    Best of luck, there's nothing worse trying to diagnose a wiring problem
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  8. #18
    I think the problem's solved people, not sure if the pot was faulty but I've resoldered all the terminals, cleaned and lubricated the pots and all seems to be good! Thanks again for the input, I'll post some pics soon Cheers Jim

  9. #19
    Mentor
    Join Date
    Aug 2013
    Location
    Mackay
    Posts
    1,276
    Excellent news Jim. Dry joints are the insidious devils of wiring. Sometimes everything looks OK but inside there's evil lurking. The main thing with soldering is to make sure you get enough heat onto the joint and that the solder flows. There are shitloads of youtube videos on good soldering technique and I would encourage anyone who doesn't do a lot of it to check them out.
    I'm glad all is up and running for you.

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •