I've got a pile of PDF G'tar plans. not sure if they will upload here. but here goes 1 51 Bass Body plan
That worked well.... NOT
PK
I've got a pile of PDF G'tar plans. not sure if they will upload here. but here goes 1 51 Bass Body plan
That worked well.... NOT
PK
Kellza
(PK)
"Jack of all trades, Master of None"
"You'll never ever know if you don't have a go"
https://www.facebook.com/PaulWKelly
Avatar Image is a "The headstock of my first scratchy"
Maybe I should email them to DB who can forward them on.
PK
Kellza
(PK)
"Jack of all trades, Master of None"
"You'll never ever know if you don't have a go"
https://www.facebook.com/PaulWKelly
Avatar Image is a "The headstock of my first scratchy"
sounds good PK, are the pdf's of guitar plans from a website ? If you could please post the website URL if they are
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Which CAD are you using, Jarrod?
Hi Wokka,
they are pdf's I collected years ago from postings people put on other forums.
I've sent two to DB. to forward on.
I have Fender 51BodyBass, Fender62stratocaster-blueprint, Fender72TelecasterCustom-Deluxe, heads paged(has about 7 headstock design.
Gibson Les-Paul-Special-pdf(double cut), Lespaul59-ver10full.
PK.
paul.kelly24@bigpond.com
Kellza
(PK)
"Jack of all trades, Master of None"
"You'll never ever know if you don't have a go"
https://www.facebook.com/PaulWKelly
Avatar Image is a "The headstock of my first scratchy"
There's a few on GuitarPlansCollection (.pdf .dxf etc.)
Scott.
Mastercam, a cadcam software for cnc's/<\\/p>[]<\\/p>/Quote from lawry on June 6, 2014, 15:50
Which CAD are you using, Jarrod?
Neck is drawn up and ready for machine
Posting Permissions
Reply With Quote
