@Weirdy cheers for the diagram buddy! I might give the other idea a crack, but either will be fine
@ultpanzi yeah that was actually my inspiration for this!
@Brendan you just wait mate, you just wait...
@Weirdy cheers for the diagram buddy! I might give the other idea a crack, but either will be fine
@ultpanzi yeah that was actually my inspiration for this!
@Brendan you just wait mate, you just wait...
You will have to be careful that the LEDs are isolated from the actual pickup circuit. You could very easily create a permanent distortion effect, especially if the circuit put the diodes into a push-pull arrangement. Diodes in that arrangement were the basis of the original distortion pedals (like the MXR Distortion+). And apparently LEDs add a real brittle, buzzy edge to the distortion. This is why the LEDs in effects pedals have to be a separate circuit.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Lawry and Weirdy, please report to the naughty room...../<\\/p>[]<\\/p>/Quote from dingobass on April 29, 2014, 18:44
Lawry and Weirdy in the same room, drinking beer and designing stuff?
That could be dangerous... probably end up perfecting the Brown Note weapon!![]()
Gavmeister
haha Lozza and Weirdy are in trouble if Gavmiester has sent them to the naughty room. Sounds like the first 2 weeks will be beer free for them !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
oh DB that came in handy for Weirdy.
Looks like its just Lozza joining us in the naughty room now !
Lozza can you please bring the coconut uke mate, I want to see/hear it in the flesh with dimarzios !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I'll wire up this gizmo in the NR, make some room for the Pest!
Pest why are you going to the naughty room ? I don't remember you using any banned products or shopping at the big green building ? We will have to set up a corner for under 18's that doesn't have any access to the beer on tap !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
haha bad luck Pest, looks like you will be wiring up your gizmo in a small dark cupboard ! haha
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in