Page 5 of 8 FirstFirst ... 3 4 5 6 7 ... LastLast
Results 41 to 50 of 75

Thread: ES-1GT - "Stormy Monday"

  1. #41
    Moderator Brendan's Avatar
    Join Date
    Apr 2013
    Location
    Perth, WA
    Posts
    3,444
    Sorry to keep you up .. Good news is that it all works - hate for you to find out after you've put in all the hard work.

  2. #42
    /<\\/p>[/<\\/p>[]<\\/p>/]<\\/p>/Quote from bargeloobs on April 27, 2014, 06:04
    Nice and clean Hillsy, looks great, what are the specs on those caps? I haven't quite decided if I'm going vintage or modern with my wiring yet, I've read JB humbukers used in conjunction with 500k pots can be quite bright anyway so I'm tending towards a modern configuration at this stage...idk.
    Those are .022uf vitamin Q's, Only used them cause I already had them and they fit the theme, There wasn't much difference between these and orange drops in my LP, it has burst bucker pros which were really bright, treble was like ice picks, re-did the wiring just like this and it smoothed it right out.

    You may just have to experiment to find what works for you, but quality pots and caps are a great start.

  3. #43
    /<\\/p>[]<\\/p>/Quote from Brendan on April 27, 2014, 08:15
    Sorry to keep you up .. Good news is that it all works - hate for you to find out after you've put in all the hard work.
    Cheers man, It's great to have people checking up along the way and why I post so many pics

  4. #44
    Moderator Brendan's Avatar
    Join Date
    Apr 2013
    Location
    Perth, WA
    Posts
    3,444
    Barge - check out the PitBull gear - Ads has done a great deal on them... Small range at the moment while Adam works out what people need. That said, a cap delivered for around $4 is pretty hot!

  5. #45
    Banned bargeloobs's Avatar
    Join Date
    Mar 2014
    Posts
    1,700
    /<\\/p>[]<\\/p>/Quote from Brendan on April 27, 2014, 12:59
    Barge - check out the PitBull gear - Ads has done a great deal on them... Small range at the moment while Adam works out what people need. That said, a cap delivered for around $4 is pretty hot!
    Bugger I just went and bought some a couple of hours ago, I wasn't aware you could even get them through here, I guess I'll know for next time.
    Cheers for the heads up!

  6. #46
    Five coats Amber inner, Mahogany outer, Black Magic Woman Next. Have been trying to blend away the f hole binding, I like the look without it.

    Have been working on the stairway to heaven here all night, as level as I can get it

  7. #47
    GAStronomist stan's Avatar
    Join Date
    Aug 2013
    Location
    Geelong, Vic
    Posts
    5,290
    nice work Hillsy, fretboard looks spot on

  8. #48
    Overlord of Music keloooe's Avatar
    Join Date
    Jan 2013
    Location
    Melbourne
    Posts
    3,162
    Sweet stuff Hillsy, looks great so far!

  9. #49
    Overlord of Music Fretworn's Avatar
    Join Date
    May 2013
    Location
    Hornsby Area, Sydney, NSW
    Posts
    3,951
    Quote from Hillsy on April 30, 2014, 00:03
    Five coats Amber inner, Mahogany outer, Black Magic Woman Next. Have been trying to blend away the f hole binding, I like the look without it.
    Schweet!!!!
    Current:
    GTH-1

    Completed:
    AST-1FB
    First Act ME276 (resurrected curb-side find)
    ES-5V
    Scratchie lapsteel
    Custom ST-1 12 String
    JBA-4
    TL-1TB
    Scratch Lapsteel
    Meinl DIY Cajon
    Cigar Box lap steel

    Wishing:
    Baritone
    Open D/Standard Double 6 twin neck

  10. #50
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    looking awesome Hillsy, nice burst. So are you going to keep the F hole binding coloured ? Will look good either way white (cleaned) or coloured.
    Did you tape off the body edge binding or scrape off the paint ? Looking nice and clean !
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

Page 5 of 8 FirstFirst ... 3 4 5 6 7 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •