Page 4 of 8 FirstFirst ... 2 3 4 5 6 ... LastLast
Results 31 to 40 of 80

Thread: PBG body blank, Tele build. UPDATE, New neck.

  1. #31
    Mentor
    Join Date
    Aug 2013
    Location
    Mackay
    Posts
    1,276
    That's pretty impressive, Dan.

  2. #32
    Moderator Brendan's Avatar
    Join Date
    Apr 2013
    Location
    Perth, WA
    Posts
    3,444
    Dan - looks like you've got necks down pat - that new jig looks great!

  3. #33
    GAStronomist stan's Avatar
    Join Date
    Aug 2013
    Location
    Geelong, Vic
    Posts
    5,290
    I want a DanMade fretboard sander!

  4. #34
    I've finished the neck over the weekend. I really enjoy carving the neck. Once you start removing material it sort of just shapes itself. As you work on taking less less off each section, the tool and wood will naturally form to the contour needed. If that makes any sense.
    A neck profile is a very natural shape to carve in to a neck, is sort of what I'm trying to say.

    I've also shielded the cavity's and wired it all up.
    I'm using a push pull pot on the tone so I can run both pup's in series when it's pulled up. Though as these things usually go for me, the wiring is never completely correct the first time around. It all works as T style should. But when I pull up for the in series setting I only have signal from the neck pup. I think the pins on the push pull are reverse to the diagram I used.

    I fitted the neck to the body and checked the alignment which was good.

    I couldn't help but throw the rest of the strings on and give it a quick strum before the neck comes off again for finishing. Let's just say I had a smile on my face from the first chord. Almost didn't want to pull the neck off and have to wait another 2 weeks to play it properly.





  5. #35
    And here's the shots your all waiting for. Keep in mind this is still mid build.



  6. #36
    Overlord of Music gavinturner's Avatar
    Join Date
    May 2013
    Location
    HOLGATE NSW
    Posts
    3,057
    All I can say is *Wow*. What a fantastic result Dan. That is class all the way! Love it.

    cheers,
    Gav.
    --
    Build #01: BC-1
    Build #02: ST-1
    Build #03: JR-1DC
    Build #04: ES-2V
    Build #05: ESB-4 (GOTM July 2014)
    Build #06: RC-1
    Build #07: MK-2
    Build #08: TLA-1
    Build #09: JR-1DC
    Build #0A: LPA-1
    Build #0B: STA-1 (GOTM April 2015)
    Build #0C: MKA-2
    Build #0D: LP-1M
    Build #0E: JB-1
    Build #0F: FS-1

    Find me:
    https://www.facebook.com/firescreek.guitars/
    http://www.guitarkitbuilder.blogspot.com.au/

  7. #37
    Moderator Brendan's Avatar
    Join Date
    Apr 2013
    Location
    Perth, WA
    Posts
    3,444
    Dan - is it worth looking at one of Gav1393's "things" - chrome pup surround?
    Take full advantage of the beautiful grain on the wood?

  8. #38
    GAStronomist stan's Avatar
    Join Date
    Aug 2013
    Location
    Geelong, Vic
    Posts
    5,290
    so nice, Dan

  9. #39
    Mentor
    Join Date
    Jan 2013
    Location
    Talawa, Tasmania
    Posts
    1,173
    Stunning work, Dan

    Keep Adam away from it, though!
    "Music is in the air; it's my job to pull it out."- Jaco Pastorius

  10. #40
    Brendan- I thought long and hard about using a pickgaurd or not. In the end I went with one. Those single coil surrounds are very neat though. To late now as I've allready got screw holes in the body.

    BG- I'm glad I'm on the other side of the country. Though that might not be to far for the TeleNapper.

Page 4 of 8 FirstFirst ... 2 3 4 5 6 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •