Page 7 of 17 FirstFirst ... 5 6 7 8 9 ... LastLast
Results 61 to 70 of 168

Thread: Lawrys IB-6S Fretless

  1. #61
    GAStronomist stan's Avatar
    Join Date
    Aug 2013
    Location
    Geelong, Vic
    Posts
    5,290
    Whilst the nut might only affect open strings, I'd still go for something that gives the tone you want, because you will still play open strings at least occasionally.
    Apparently brass gives the brightest sound, bone the most mellow of the three and tusq and composites are somewhere in the midddle

  2. #62
    Mentor
    Join Date
    Aug 2013
    Location
    Mackay
    Posts
    1,276
    Well here's an update I wasn't expecting.
    Just got back from two weeks holiday in Victoria and we have landed bang into a cyclone. Before we went away we cleaned up the place 'just in case' so fortunately everything's pretty secure. The cyclone is due to cross the coast in about 12 hours and the winds are pretty wild already. There are also a few trees down and minor flooding occurring around town too. Still, it's only a category 1 and it's about 250-300 kilometers away so shouldn't sook too much. Probably in for a wild night though. And I was looking forward to getting some work done on the fretless when we got back :-(
    Bugger!

  3. #63
    Protect the bass! Good luck mate, hope it's not too rough.

    Scott.

  4. #64
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    thats not good news to return to Lozza, as Weirdy said make sure the bass is safe !
    I've seen pics in Townsville has some mini flooding too.
    Hopefully it blows over pretty quick and you are building on Friday sometime
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  5. #65
    Mentor
    Join Date
    Aug 2013
    Location
    Mackay
    Posts
    1,276
    Thanks for your concern, guys. For the bass that is.
    It should be fine, it is at work in a new building only 12 months old (new Mackay Base Hospital - biomedical engineering department). So as long as I'm not flooded out I may still get in there tomorrow or the weekend.
    Cheers.

  6. #66
    Mentor vh2580's Avatar
    Join Date
    Aug 2013
    Location
    Cleveland Qld
    Posts
    1,183
    Starting to ramp up in Townsville now. gonna be a fun evening.
    Tony

  7. #67
    GAStronomist stan's Avatar
    Join Date
    Aug 2013
    Location
    Geelong, Vic
    Posts
    5,290
    stay safe guys, all the best

  8. #68
    Mentor
    Join Date
    Aug 2013
    Location
    Mackay
    Posts
    1,276
    @Stan. Thanks man.
    @Tony. We've already had one blackout for an hour. Gotta admire the linies that ago out in that crap and work on the bitey wires. Where abouts are you in TVL?

  9. #69
    Mentor vh2580's Avatar
    Join Date
    Aug 2013
    Location
    Cleveland Qld
    Posts
    1,183
    Hi Lawry
    Special type of guys,them and the SES, Im out at Deeragun,
    Mackay seems to have copped a lot more rain and wind than us so far.
    reckon well start knowing about it in about three - four hours.
    Gone Cat 2 so buckle up and stay safe.
    Tony

  10. #70
    Mentor AJ's Avatar
    Join Date
    Mar 2013
    Location
    Hoppers Crossing, Melbourne
    Posts
    562
    Stay safe you guys
    Projects:
    LP-1A
    TL1-A
    LP-1Completed
    TL-1Completed
    Yamaha rebuild: Completed
    Mako -Scratch designed: Completed
    PUP winder: Completed

    Facebook : www.facebook.com/andrew.johns.1272010
    Skype: andyjohns1

Page 7 of 17 FirstFirst ... 5 6 7 8 9 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •