Page 3 of 6 FirstFirst 1 2 3 4 5 ... LastLast
Results 21 to 30 of 57

Thread: latest scratch body build - Explorer with Iceman horn

  1. #21
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    /<\\/p>[]<\\/p>/Quote from Gavin1393 on January 15, 2014, 11:14
    /<\\/p>[/<\\/p>[]<\\/p>/]<\\/p>/Quote from wokkaboy on January 15, 2014, 09:51
    thanks for the tips Brendan but I saw Gavmeister's HB-4 done by DB in conch/amaranthine and it didn't float my boat - the boat sunk !
    Gee, Woks! DB was so proud of his efforts and it's my favourite Fretless Bass. He is going to be so hurt that you don't like it.
    I bet Gav its your ONLY fretless bass you own so it must be your favourite !
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  2. #22
    Moderator Gavin1393's Avatar
    Join Date
    Sep 2012
    Location
    Mindarie, Western Australia
    Posts
    3,152
    Yeah, you got me....
    http://www.buildyourownguitar.com.au/forum/image.php?type=sigpic&userid=1258&dateline=1443806  448Gavmeister

  3. #23
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    got a bit more done on the Iceplorer, cut off the length for the neck pocket and got both neck and bridge pup routes done. Forgot how stressful using a router is ! Scored an explorer neck off DB so next step is to route the neck pocket, then can work out where the bridge and tailpiece bush holes will go.
    Then have to make a template for the control cavity, they are pretty simple 'sausage' shape on the explorer, similar shape to the tele template I'm using that got half destroyed from the wrong router height on an old job !


    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  4. #24
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    here's a few more pics showing how it looks with the explorer neck. Lined up my face nicely in the reflection of the pickup !


    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  5. #25
    Moderator Brendan's Avatar
    Join Date
    Apr 2013
    Location
    Perth, WA
    Posts
    3,444
    Looking good Woks. (The guitar I mean).

  6. #26
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Got the neck pocket routed tonight and the hole drilled from neck to bridge pup cavity. Next step is to locate bridge and tailpiece bush holes and drill them, then route control cavity and drill output jack hole, then should be ready for a final sand before staining begins. Colours to be decided yet

    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  7. #27
    Mentor
    Join Date
    Aug 2013
    Location
    Mackay
    Posts
    1,276
    That's going to look very swish with the timber as it is. I also think you have far too much patience.
    It's a pity you can't lock in your image on the pup. How cool would that be!

  8. #28
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    made up 2 templates for the control cover and got the cavity routed and holes/recesses drilled for switch and pots.


    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  9. #29
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    then got the final sanding and shaping done and got 1st coat of cherry flamenco on body and neck.
    Thanks Brendan for the idea of using a clamp to hang the set neck body !

    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  10. #30
    Mentor AJ's Avatar
    Join Date
    Mar 2013
    Location
    Hoppers Crossing, Melbourne
    Posts
    562
    lookin good
    Projects:
    LP-1A
    TL1-A
    LP-1Completed
    TL-1Completed
    Yamaha rebuild: Completed
    Mako -Scratch designed: Completed
    PUP winder: Completed

    Facebook : www.facebook.com/andrew.johns.1272010
    Skype: andyjohns1

Page 3 of 6 FirstFirst 1 2 3 4 5 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •