It was originally set up to reverse phase but after several hours of trying to get rid of the hum I gave up and sine I already had the hole drilled I turned it onto a bride/ bridge and neck/ neck 3 way switch....may have a go at the phase reversal when I get some upgraded pickups!
Gavmeister
you nailed it Gav, superb looking IB5, one coat of dark tease worked well, its slightly darker than my amber IB5, the bridge looks like an upgrade and keen to hear what the switch does ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Woks, see post above yours! :P/<\\/p>[]<\\/p>/Quote from wokkaboy on December 9, 2013, 10:17
you nailed it Gav, superb looking IB5, one coat of dark tease worked well, its slightly darker than my amber IB5, the bridge looks like an upgrade and keen to hear what the switch does ?
That is one of the best looking basses I've ever seen Gav.
Engage lust mode.
Lust mode engaged.
Fworr!
Thanks guys! Quite a few of these are being put together at the moment so lets look out for them on the forum!
Stoopi'd dumb rookie mistake........
Took my Ash bass to Pitbull HQ for photo's......BAS came out of hiding and my bass guitar is enjoying its new home, the Wall of Fame!
And don't it look damn fine hangin' there!
Gav - saving grace is that it means one less hanger for your tele at PBHQ. That said I did hear Ads talking about changing the hangers around so he could get a few more up...
Current builds:
GPB-4B: https://www.buildyourownguitar.com.a...548#post184548
That Bass looks absolutely stunning! That's the look I was going for with my STA-1, it certainly didn't look like that after the first coat! I think I may have mentioned in my build diary that I was trying to emulate this Bass but I attributed the build to Dingobass, sorry Gav!
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote