Page 2 of 2 FirstFirst 1 2
Results 11 to 16 of 16

Thread: mocking bird build

  1. #11
    GAStronomist stan's Avatar
    Join Date
    Aug 2013
    Location
    Geelong, Vic
    Posts
    5,290
    Cool!

  2. #12
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Angus, tuner angles look fine to me, any original look in my books is cool and sets the axe apart from the 'normal' perpendiclar look
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  3. #13
    Member
    Join Date
    Jun 2013
    Posts
    414
    Looks cool Angus look forward to the rest of the build

  4. #14
    bit of an update ( photos to come )

    all the parts have been ordered/sourced , except for a coupla little odds n ends

    i had ordered in a cheap black neck plate , thought i was on a winner , =\\ buuut , when i got it the other day i found that it was etched with logos and stuff for Lyon by washburn , so ill be getting anothery down the track

    necks been defretted and de nutted ( crossed my legs n made a face writing that =\\ )
    and its had a coupla coats of stuff put on it , looking dam nice to , almost a bit of a flame starting on it .
    been thinking about either staining the front of the headstock black or ordering in a headstock veneer of something

    still waiting around for decent weather to blow another coupla coats of black onto the body , average hi temp here lately has only been around 17 - 19 so no good for spray painting .

    ive been trying to decide if i want to use the black rectangle jack plate that i ordered ( the original was a chrome one ) or if i change it to a black tele cup jack

    lol as a glutton for punishment , ive semi been thinking about a build using the chrome parts from the kit , since i didnt use any of it

  5. #15
    Looking nice...

  6. #16
    soooo , neck halfish done , gotta put some colour the front of the headstock , thatll be tomorrows job if things go well . then just have to get another ( bone ) nut and do a re-fret
    (pic doesnt sho it , buut theres some nice grain in the neck

    bodies almost done , only a little bit of undercoat shows through , shouldnt be to much work left on it , sanding all the curves of it is a hassle though :? :? :?
    (gonna make myself some curved sanding blocks of various size and curves to help with that in the future)

    and i coloured in my switch with a sharpie , might get another permanent marker and go over it again though because the sharpie has a bronze hue to the black in the right light

    weekends jobs might be soldering what i can of the controls , and probably drill the body out a little bit so the pots and switch fit a bit better ( im using upgraded full size bourne pots ) especially when i put the shielding in .

    hopefully the pickups arrive soon , been waiting around like blackboard from mr squiggle for them (huuuuuurrryyyy UUUUUUUUUUP )

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •