Aha the photos did work
Aha the photos did work
TIM!!!!!
No mate!You dont want to sheild over the top of the wiring unless you wrap the wires in shielding first!!! The wires act as an antennae and by placing them outside of the shielding arrangement negates shielding in the first place!
![]()
Gavmeister
Hey Tim,
Would you mind sending me a copy of the wiring diagram you're working from? Even though mine will be a 2-switch it might help me decide which way to go with the final build.
rhay71@gmail.com
Also are your switches all on/on/on or is one an on/off/on?
Cheers.
Gav (as we'd all expect) is quite right, unless you use shielded cables, but it looks like there is a few single-insulated ones in the loom./<\\/p>[]<\\/p>/Quote from Gavin1393 on July 21, 2013, 20:39
You dont want to sheild over the top of the wiring unless you wrap the wires in shielding first!!!
yep no problems Ray.
haha and I thought I was being smart Gavin.. Thanks for the heads up ,mind you the trench as made fitting the pup easier and smoother
Cheers Tim!
3rd top gloss coat on the ama SGD meets his cousy amber IB5, they make instant mates
![]()
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
got 5th and final top gloss coat on body and final top coat on necks, on target for weekend assembly
![]()
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Sooooo purple!
I'm keen to see it together; purple bod and natural necks, wild combo.