Page 5 of 10 FirstFirst ... 3 4 5 6 7 ... LastLast
Results 41 to 50 of 100

Thread: Wudtone Vs Nitro

  1. #41
    Cool. Some of that hardware looks new on the fresh bodies - the Wudtone has really effected the look of the instruments!

    If you have reasonably uniform (note for note) samples from each instrument I can run them through the analyzer and get some hardcore data one each result?

    Even with more "random" pieces of audio some comparative data can still be gained, but the results will be more generalised.

    Can I suggest some double-blind type tests?

    Two audio samples from each instrument, comprised typically a "before" and an "after", although throwing in one set of samples that were taken from the same guitar would be funny. These samples could then be published to the group, anonymously labelled as A and B, allowing us to choose our favourite sounds and also take a stab at which we believe is the nitro or Wudtone.

    In the late 80's and early 90's I was part of a number of double-blind tests for both CD v. Vinyl and Analogue v. Digital recording. The results were always interesting.

  2. #42
    Moderator Gavin1393's Avatar
    Join Date
    Sep 2012
    Location
    Mindarie, Western Australia
    Posts
    3,152
    Might be a bit late to suggest note for note tests.....I aint putting Nitro back on these beauties!!!
    http://www.buildyourownguitar.com.au/forum/image.php?type=sigpic&userid=1258&dateline=1443806  448Gavmeister

  3. #43
    Moderator Gavin1393's Avatar
    Join Date
    Sep 2012
    Location
    Mindarie, Western Australia
    Posts
    3,152
    Close ups



    http://www.buildyourownguitar.com.au/forum/image.php?type=sigpic&userid=1258&dateline=1443806  448Gavmeister

  4. #44
    Overlord of Music keloooe's Avatar
    Join Date
    Jan 2013
    Location
    Melbourne
    Posts
    3,162
    Gibson knobs on a Fender???
    Eh, they looks great Gav, care to tell us the awesome colours?

  5. #45
    [quote]/<\\/p>[]<\\/p>/Quote from Gavin1393 on July 17, 2013, 22:42
    Might be a bit late to suggest note for note tests.....I aint putting Nitro back on these beauties!!![quote]

    What?! So slack.. send 'em down here, I'll do it.

    Fair enough though. Do you think it will be possible to mimic the first recordings and create similarly structured samples?

  6. #46
    Overlord of Music Fretworn's Avatar
    Join Date
    May 2013
    Location
    Hornsby Area, Sydney, NSW
    Posts
    3,951
    I especially like the one with the humbuckers, but they all look awesome.
    Current:
    GTH-1

    Completed:
    AST-1FB
    First Act ME276 (resurrected curb-side find)
    ES-5V
    Scratchie lapsteel
    Custom ST-1 12 String
    JBA-4
    TL-1TB
    Scratch Lapsteel
    Meinl DIY Cajon
    Cigar Box lap steel

    Wishing:
    Baritone
    Open D/Standard Double 6 twin neck

  7. #47
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    yer Gav those 3 strats look sweet, looks like quite a few hardware changes, so will it be a fair comparison ?

    Rhay sounds interesting the blind test and the analyser

    what are you planning to do with the strats Gav, keep them in your collection ?
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  8. #48
    Overlord of Music keloooe's Avatar
    Join Date
    Jan 2013
    Location
    Melbourne
    Posts
    3,162
    Hmmmm... I see that there is a Strat wooth H/S/H config... the other two are S/S/S config, that will void any form of result, unless the middle pups are the same....

  9. #49
    Moderator Gavin1393's Avatar
    Join Date
    Sep 2012
    Location
    Mindarie, Western Australia
    Posts
    3,152
    The sound tests were done after I completed the Wudtone but BEFORE I upgraded the components. I kept the original pickguards intact and had to merely ground the bridge and reattach the output Jack. It is my intention to provide 10 samples....3 from each guitar with a red herring included which would be a second sample from one of the guitars. Tone deaf individuals who cannot tell the difference will be excluded from the sample if they have these samples at opposite ends of the spectrum....
    http://www.buildyourownguitar.com.au/forum/image.php?type=sigpic&userid=1258&dateline=1443806  448Gavmeister

  10. #50
    Moderator Gavin1393's Avatar
    Join Date
    Sep 2012
    Location
    Mindarie, Western Australia
    Posts
    3,152
    /<\\/p>[]<\\/p>/Quote from rhay on July 18, 2013, 06:31
    Do you think it will be possible to mimic the first recordings and create similarly structured samples?
    The way I play guitar? Tough ask!

    http://www.buildyourownguitar.com.au/forum/image.php?type=sigpic&userid=1258&dateline=1443806  448Gavmeister

Page 5 of 10 FirstFirst ... 3 4 5 6 7 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •