shape looks pretty good Pest, did you have to sand off the wudtone to do the pyography pen work ?
Hope you got enough wudtone to recoat the headstock at least twice after a sand !
shape looks pretty good Pest, did you have to sand off the wudtone to do the pyography pen work ?
Hope you got enough wudtone to recoat the headstock at least twice after a sand !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yea, i briefly attacked it with the disk sander!!!! Even my woodwork teacher said it looked really good!!
I'm very happy with the results from my build so far!!!
so you used an orbital sander to remove the wudtone ? looks like you used a pretty harsh sandpaper so you will have to sand it down to at least 240 grit before applying wudtone
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yeah, the paper was harsh, when I was doing the quicker passes, i accidentally hit the top screw for the truss rod cover, sparks flew, but nothing broke!! I'll sand it down tonight
crikey Pest you used an orbital sander with the truss rod cover on, you should have removed all the hardware !
And I wouldn't use an orbital paper lower than 120 grit !
Looks like you got a fair bit of sanding to do tonight !
And I'd remove the Les Paul writing, sand that off bro !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yea, looks like I'm going to implement DB's rule again!!! I didnt have enough time ot remove the TRC here at home this morning before I got in the car with my guitar and amp to play Seven Nation Army in front of 300 people....
well its a lesson next time you could have removed the truss rod cover before you got the sander out - 45 second job - 3 small phillips head screws !
How did the jam go in front of 300 people is a good crowd, did anyone record the song on video ?
good luck with the sanding, you will have sanders elbow again ! When your arm gets sore give it to your old man to sand ! haha
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
hahaha, yer, the crowd was great!!!! It was outside, which was great, the Epi was AWESOME in a Marshall AND Fender amp system!!!
cool, so they must have provided the amps, bit of a change from your 10W amp hey
Hope you had the epi low enough so your knuckles hit the ground ! haha
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
it was as low is it could go, LIKE ALWAYS!!! I get my playing style from my musical idol, Billie Joe Armstrong :P, but that means the strap likes to fall off a lot, which means I gotta get some strap locks!
Posting Permissions
Reply With Quote![[url=https://www.facebook.com/kellysgutiars]](image.php?u=1285&type=sigpic&dateline=1444110346)