The back- second deep colour coat, in direct sunlight. It's a shame the audience won't see this side...
The back- second deep colour coat, in direct sunlight. It's a shame the audience won't see this side...
"Music is in the air; it's my job to pull it out."- Jaco Pastorius
sweet bass guy,good to see that damn glue is gone. Looks cool with the neck in place.
I can't wait to see the SGD bolted together, I'm doing my headstocks in amaranthine, hope to cut the headstocks tonight and get a coat on
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Amaranthine headstocks!!! Photos, or it didn't happen!
"Music is in the air; it's my job to pull it out."- Jaco Pastorius
thats the plan BassGuy, probably vintage yellow neck and back of headstock and ama ontop of the headstock, should look cool with the 12 string headstock being so long !
I'll do my best to get at least one headstock cut, sanded and coated tonight so check my build diary later tonight
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
That is looking just the Ants Pants Bassguy!
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
Final base coat- now awaiting the gold highlights.
"Music is in the air; it's my job to pull it out."- Jaco Pastorius
sweet az Bass Guy,
hey can you please help me out with a wiring diagram for the PBH ? your JB had a humbucker and neck pickup ? - cheers
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
No it was two single coils, but I will have a hunt around for you.
"Music is in the air; it's my job to pull it out."- Jaco Pastorius
Hi Bass Guy,/<\\/p>[]<\\/p>/Quote from Bass Guy on June 27, 2013, 12:51
No it was two single coils, butnI will have a hunt around for you.
thanks mate, this is my first bass build and I'm not that familiar with them, attached is a photo I took its got 4 pots, humbucker bridge and the 2 singles on the neck. Sorry to hijack your build thread but thought you would see this message !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
So happy with it, that I showed it to Stevie's mum. She's thrilled.
Hence the celebratory ale.
"Music is in the air; it's my job to pull it out."- Jaco Pastorius
Posting Permissions
Reply With Quote
