Prices...

[keloooe]

/<\\/p>[/<\\/p>[]<\\/p>/]<\\/p>/Quote from dingobass on June 12, 2013, 21:12

/<\\/p>[/<\\/p>[/<\\/p>[]<\\/p>/]<\\/p>/]<\\/p>/Quote from adam on June 12, 2013, 19:15
Hey guys, if you do take advantage of the "July 1 Price Guarantee", please put a note on your order so we know to keep your order on hold.

There's a "Order Notes" section when you place an order, so just put "July 1" or something like that in there so we know what's going on.

Gav, I've put a note on yours.

Cheers

And that note says.
DB to remove frets and give the kits a first coat of Conch Girl.

DB, im scared now about the StratoPester..... I dont want a pink, fretless Strat!

[AJ]

would have liked to take part in this "pre-order", but alas I don't get a tax return being a pensioner.... bummer hey!

[keloooe]

And I'm outta money .....
Looks like my StratoPester mods will have to wait a bit...

[wokkaboy]

Hey Pest have you checked to see how much routing is required for your mods ? I reckon a bucker would probably fit inside the standard route, just need to cut a bigger hole in the scratchplate maybe ?
Pretty devo that you didn't take out the first member to reach 1000 posts Pest !

[Gavin1393]

/<\\/p>[]<\\/p>/Quote from wokkaboy on June 13, 2013, 15:27
Hey Pest have you checked to see how much routing is required for your mods ? I reckon a bucker would probably fit inside the standard route, just need to cut a bigger hole in the scratchplate maybe ?
Pretty devo that you didn't take out the first member to reach 1000 posts Pest !

but he will no doubt be the first to 100,000 posts since the older crew on here will be dead and buried long ago! Age is on the Pest's side!

[keloooe]

Well, I need a humbucker, a razor file from StewMac (to cut the guard), a push-pull pot, a black ice overdrive, wire, and I'm adding in some SM tools that will help me, which goes to $193, then there's the kit, that's $130 (at the moment), then there;s the Wudtone, that's like $43, then there's shipping for the SM stuff and the kit, so that's around $35..... Yep.... That's A LOT of money....

I dont know if a humbucker with the bridge single coil slant will fit in the rout, DB says it probably won't, someone needs to test that theory....

[AJ]

/<\\/p>[/<\\/p>[]<\\/p>/]<\\/p>/Quote from keloooe on June 13, 2013, 16:16
Well, I need a humbucker, a razor file from StewMac (to cut the guard), a push-pull pot, a black ice overdrive, wire, and I'm adding in some SM tools that will help me, which goes to $193, then there's the kit, that's $130 (at the moment), then there;s the Wudtone, that's like $43, then there's shipping for the SM stuff and the kit, so that's around $35..... Yep.... That's A LOT of money....

I dont know if a humbucker with the bridge single coil slant will fit in the rout, DB says it probably won't, someone needs to test that theory....

** Have you checked your local RC-Hobby stores in your area for a razor saw? Could work out somewhat cheaper than from Stewmacs.....just a thought for you.. ad I'm not far off finishing my coil winder .. will need some practice on winding coils..lol might be able to come to an agreement for you..

[Gavin1393]

Hey AJ! post some pics of the winder. With your woodworking skills I reckon it will look sensational!!

[keloooe]

Nah, I prefer SM's razor files, a mate recommended them to me last night (DB did as well a few weeks ago!), And they can be used to do some headstock shaping, so it's a win-win situation!!!

Yes, post some pics of your winder!!! I'm thinking of doing one as well, Gav inspired me to want to try!!!

[AJ]

will post some pickies when it warms up a tad .. too cold for me atm to wander outside ....
Dam it's cold.. don't like the cold, don't like the heat of summer.. don't like the rain...whine , whine, whine... Must be getting too old now..