Only had time for a light sand but check out the work that has gone into this body, so much routing and drilling holes, it's a work of art. Would hate to know how many hours would take to get to this stage by hand !
Only had time for a light sand but check out the work that has gone into this body, so much routing and drilling holes, it's a work of art. Would hate to know how many hours would take to get to this stage by hand !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Hmmm... The Gibson one only has 2 switches.... Adam, this kit is the Epiphone version, not the Gibson version
Man, that looks so cool! That's going on my list for sure!
Yeah that is a serious piece of work there. My brother has planted a seed that he wants me to build him an SG...I wonder would he want a double neck?
I'll watch this build with interest.
That would be difficult, even with one of those duplicator thingies!!!
That is a work of art in routing...
Wokka, just a pity you can't enter this in GOTM due to the one guitar per customer restriction!
Gavmeister
HAHAHAHA!!!! Noice one there Gav!!! Oh, congrats on 1000 posts mate!!! I fell behind, you deserve to be ahead of the Pest!/<\\/p>[]<\\/p>/Quote from Gavin1393 on June 12, 2013, 07:16
Wokka, just a pity you can't enter this in GOTM due to the one guitar per customer restriction!
You will always be ahead Pest! By 2 hours or so....but thanks for the congrats on the posts. What 1000 posts really says to me is that I need to be spending more time building guitars than nattering on the forum!!
Haha Gav, yeah, GET BACK TO YOUR ACOUSTIC WITH THE FISHMAN ELLIPSE MATRIX BLEND!!!!
I wanna steal it.... :P
haha you are funny Gav, it's got one body and one input jack so I'm calling it one guitar. It's going to take a while to build with 2 necks and 2 day curing time for aramanthine, so more than likely will be my August GOTM entry./<\\/p>[/<\\/p>[]<\\/p>/]<\\/p>/Quote from Gavin1393 on June 12, 2013, 07:16
Wokka, just a pity you can't enter this in GOTM due to the one guitar per customer restriction!
I suppose it's like the 2 headed - one body Tasmanian - is this one or 2 people ? haha
oh and big congratulations Gav for cracking the 1000 posts and beating the Pest to the post ! You could have built another acoustic by now if you kept the forum replies down but all forum members appreciate your feedback and help !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
It's probably just me, but I always think that the 12 string neck should go on the bottom, and the 6 string on top. I bet the necks aren't interchangable though as I imagine the 12 string neck would have to be a bit wider.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Posting Permissions
Reply With Quote![[url=https://www.facebook.com/kellysgutiars]](image.php?u=1285&type=sigpic&dateline=1444110346)