Page 5 of 22 FirstFirst ... 3 4 5 6 7 15 ... LastLast
Results 41 to 50 of 211

Thread: DBs next project.... turning a chunk of tree into a Baritone Guitar

  1. 06-06-2013, 06:30 AM #41
    wokkaboy
    wokkaboy is offline
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    DB you better not tell 4D you have a beer fridge in your man cave !

    sounds good all the extra room you will have for more power tools !
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in
    Reply With Quote Reply With Quote
  2. 06-06-2013, 08:05 AM #42
    dingobass
    dingobass is offline
    Moderator dingobass's Avatar
    Join Date
    Sep 2012
    Location
    Perth
    Posts
    4,491
    Clamps off and final thickness sanding done.

    Outline of beastie traced on so you can see how it works.


    Threw in a couple of pics of the join as well!


    There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
    Reply With Quote Reply With Quote
  3. 06-06-2013, 02:04 PM #43
    Brendan
    Brendan is offline
    Moderator Brendan's Avatar
    Join Date
    Apr 2013
    Location
    Perth, WA
    Posts
    3,444
    Not going neck thru?
    Current builds:
    GPB-4B: https://www.buildyourownguitar.com.a...548#post184548
    Reply With Quote Reply With Quote
  4. 07-06-2013, 01:02 AM #44
    dingobass
    dingobass is offline
    Moderator dingobass's Avatar
    Join Date
    Sep 2012
    Location
    Perth
    Posts
    4,491
    Not on this one Brendan.... but stay tuned because there is a possibility of a neck through on the Jaguar VI..

    There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
    Reply With Quote Reply With Quote
  5. 07-06-2013, 01:11 AM #45
    wokkaboy
    wokkaboy is offline
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    looking good DB, are you going to cut out the shape on Gav's flash new bandsaw ?

    the body shape only just fits - thats good little wastage for the next Jag VI !
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in
    Reply With Quote Reply With Quote
  6. 07-06-2013, 01:23 AM #46
    keloooe
    keloooe is offline
    Overlord of Music keloooe's Avatar
    Join Date
    Jan 2013
    Location
    Melbourne
    Posts
    3,162
    Where's my Custom LP???? haha!!!!!
    My wiring is complicated, if you dare to try it DB!!!
    [url=https://www.facebook.com/kellysgutiars]

    Facebook! | Twitter! | Discover my band! | Kelly's Guitars!
    Reply With Quote Reply With Quote
  7. 07-06-2013, 01:28 AM #47
    wokkaboy
    wokkaboy is offline
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Quote from keloooe on June 6, 2013, 10:23
    Where's my Custom LP???? haha!!!!!
    My wiring is complicated, if you dare to try it DB!!!
    nah Pest, LP wiring is a piece of cake. Once you have buit an ES kit you can wire any other PBG kit blindfolded !
    So next kit Pest you should build an ES bro !
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in
    Reply With Quote Reply With Quote
  8. 07-06-2013, 01:45 AM #48
    Gavin1393
    Gavin1393 is offline
    Moderator Gavin1393's Avatar
    Join Date
    Sep 2012
    Location
    Mindarie, Western Australia
    Posts
    3,152
    Quote from wokkaboy on June 6, 2013, 10:28
    Quote from keloooe on June 6, 2013, 10:23
    Where's my Custom LP???? haha!!!!!
    My wiring is complicated, if you dare to try it DB!!!
    nah Pest, LP wiring is a piece of cake. Once you have buit an ES kit you can wire any other PBG kit blindfolded !
    So next kit Pest you should build an ES bro !
    LP's are easy! Agree with Wokka....Pest, you need to do an ES!

    I have extended the invite to DB, so watch this space for some updates!
    http://www.buildyourownguitar.com.au/forum/image.php?type=sigpic&userid=1258&dateline=1443806 448Gavmeister
    Reply With Quote Reply With Quote
  9. 07-06-2013, 01:55 AM #49
    wokkaboy
    wokkaboy is offline
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Quote from Gavin1393 on June 6, 2013, 10:45

    LP's are easy! Agree with Wokka....Pest, you need to do an ES!

    I have extended the invite to DB, so watch this space for some updates!
    So Gav can you please give us the model of your new bandsaw and a rough cost ? 4D are looking at a new bigger bandsaw

    does it have a coffee maker and a fridge inbuilt below the cutting plate ?
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in
    Reply With Quote Reply With Quote
  10. 07-06-2013, 02:06 AM #50
    Gavin1393
    Gavin1393 is offline
    Moderator Gavin1393's Avatar
    Join Date
    Sep 2012
    Location
    Mindarie, Western Australia
    Posts
    3,152
    Sure Wokka,

    Here it is. Model BP - 355 at $890 but got 10% off.

    Came highly recommended from other guitar sites I was trawling through to find what to get.


    Features

    •1500W / 2hp 240V motor
    •Safety magnetic switch with emergency stop
    •Curved hinged blade guards with safety micro-switches
    •Heavy duty steel fabricated frame
    •Ball bearing blade guides
    •2 x blade speeds via pulley system
    •Quick-release blade tension mechanism
    •Blade tension sight indicator
    •Rack & pinion adjustment on top blade guide
    •Cast iron table tilts to 45?
    •100mm dust chute


    Includes

    •Mitre guide
    •Quick lock rip fence
    •Enclosed stand




    ORDER CODE - W4224 (Hare and Forbes)
    Model - BP-355
    Throat Capacity - 345mm
    Wheel Diameter - 355mm
    Height Capacity - 245mm
    Table Size - 535 x 435mm
    Frame Type - Steel
    Motor Power - 1500W, 2hp
    Motor Voltage - 240V
    Full Height - 1800mm
    Weight (nett) - 96Kg
    Blade Code - W4224A/B
    Blade Length - 2750 x 16mm


    http://www.buildyourownguitar.com.au/forum/image.php?type=sigpic&userid=1258&dateline=1443806 448Gavmeister
    Reply With Quote Reply With Quote
Page 5 of 22 FirstFirst ... 3 4 5 6 7 15 ... LastLast
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules