Custom Big Muff Build.

[DrNomis_44]

Here's a pic of the two pieces of sheet aluminium I cut for the two halves of the case I'm making for my custom Big Muff build, left is the bottom half, and right is the top half, I need to mark-out and drill holes for the in/out sockets, footswitch, and the three pots, luckily enough I have enough sheet aluminium left over to make a clip to hold the 9V battery in position, and I also need to figure-out how I'm going to make the 90 degree bends where they're needed.



Good thing I remembered all the metalworking stuff I learnt while doing my tech for my apprenticeship with my dad as a fitter & machinist in the late 90's, handy skills to have.