Quote Originally Posted by fender3x View Post
What sort of guitar you plan to put this circuit in? When I think of Gretsch guitars I tend to think about the hollow bodies. If you are going to do some experimenting to dial in just the right amount of mud, you will probably want to do it on a board outside the body. This is hardest on semi-hollow guitars where the wiring loom has to be worked through the F-hole (you also need to make sure all the parts you install will actually pass through the F-hole) A bit easier on a fully hollow where it can go through the pickup hole. Much easier if you are putting it into a Telecaster ;-) and only need to take out a couple of screws to get to the tone stack.
It's to be put in a solidbody, so putting it together on a board forst should be relatively easy (If I understand what that is correctly!).