Hi guys,

Update : Have done a last coat of shellac.

I feel shellac layers are so thin to sand before laying the clear coat.

As usual I have a lots of doubts

1.Do I have to add more layers of shellac and sand with 400 before laying clearcoat or can go ahead with clear coat?

2. Do I need to spray clearcoat indoors. Does it need a dust free environment?

3. How do I hang the guitars for spraying at home?

4.How many coats of Clear before I start sanding?

5. Do I have to sand with 600 and the spray a few Clear coat and then sand 800 and so on? Or do I have to lay enough coats upfront and then keep sanding sequentially?

6. At what point should i levels sand? When should I start wetsanding?

7. At what point should i stop the clear and go ahead to buff and polish?

8. How do I avoid drips and run ins? And how do I tackle drips and run ins?

I am sorry for asking a lot of questions. I just want to be prepared

Thanks in advance

Drashkum


Sent from my NE2211 using Tapatalk