Astracaster First Build FS-1

[Simon Barden]

Don’t apply sanding sealer if the top is stained, it is only for bare wood before sanding.

If that last picture is taken after the sanding incident, then it looks good enough not to worry too much about. I’d be tempted to do something about the centre join-line stripe, but that’s it.

[Drashkum]

Don’t apply sanding sealer if the top is stained, it is only for bare wood before sanding.

If that last picture is taken after the sanding incident, then it looks good enough not to worry too much about. I’d be tempted to do something about the centre join-line stripe, but that’s it.

Yes, @Simon Barden. Last pic is after sanding incident I stopped once I realised I'm going through. Good to know that it still looks ok.

But it's like a musicians curse right?. Musicians can never appreciate their tracks that their listeners adore as they know what mistakes they have done.

Should i not apply 3 coats of sanding sealer over stain to seal the stain and then sand slightly and apply rattle can PU?

Rattle can 1K clear causes stain to blotch without sanding sealer


Sent from my NE2211 using Tapatalk