Astracaster First Build FS-1

[m0j0]

I also wanted to know how do u choose the colour of the back & sides of your guitar build and back of the neck?

Basically, I generally start the thought process with "what don't I already have?" and go from there. But I think my most favourite colour combination I've done was my build #13 - thinline ST with spalted maple veneer. (Build diary here - https://www.buildyourownguitar.com.a...ad.php?t=11695)

I went with tobacco brown on the back and vintage amber on the veneer. I also hit the neck and headstock with a single coat of vintage amber and while still wet, wiped over it with a wet cloth to thin it out and smooth out the finish - the purpose of this was to give it a bit of an aged look. Coated the whole thing with many (40) layers of Tru Oil which darkened everything to some very nice tones and made it shine.

[Drashkum]

If you do your staining in a conventional way, it think it's near impossible to make a good line. Most stains are designed to penetrate, so no matter how well you have things taped off the stain will leach under it. IIRC there was someone on the forum who was able to make a good line but I don't remember how they did it. The binding should help make the line however, unless it has some cracks. If you have the binding well taped the stain should not go under the fine-line tape on the binding. You might try a small section by the heel to check first...

That crowning file should work well. I have the three sided version from them which I have been pretty happy with.

FWIW You may not want to leave the masking tape on the guitar too long. I try not to leave regular masking tape on wood or paint. It's generally OK for short periods, but the adhesive is stronger than blue or green painter's tape and can pull paint off, or even veneer off, if you are not careful. Also the adhesive can leave a residue, particularly if your climate is hot, humid or you leave it on for too long. I actually don't like to leave any sort of tape on for very long... Here's the way I did my last one. I had already painted the top and was doing the sides at this stage.



You can't see it in the pic, but the binding has blue 1/4" (6mm) fine line vinyl tap on the binding. I found a to-scale PDF of an ES 335 body which a printed, cut out and used as a cover. The blue painter's tape is stuck mostly to the vinyl fine line tape and the paper. I tried to have as little as possible of the tape stuck to the paint. Even then I only left the tape in place for a few days. Long enough for the paint on the sides to dry, but not long enough for it to cure.

The sides of the FS-1 kit is sandwiched between binding on either side. I really hope it doesn't seep through that. I have been reading from forum and other groups telling me to apply a thin quote of clear over the binding before staining so that it resists stain. I will have to try to do that. I am staining the back first and then the sides and I am keeping the top for the last. The tape I have used is low tack. I really hope I don't have to keep it much longer. I shall try to remove it as soon as Possible

I went to the timber shop the other day. In india they don't have basswood samples. Seems They are not native to India. So they gave me 3 slabs of Steam Beech wood which looks similar in Colour to the veneer and back. Now I have something to try my colours on to see how exactly the shade may look.







Edit: I did try the colours now. Tried Pinks and Purples and couple of them are pink and purple mixed in different ratios. Tried Green, Green and yellow on top, Orange and Blue.

I am still unable to make up my mind on which shade to stain. I like the blue but I have 3 blue guitars already. Orange and olive green and pinks too look good. I may try to dilute the purple today and stain again today.

What do u guys think?

Basically, I generally start the thought process with "what don't I already have?" and go from there. But I think my most favourite colour combination I've done was my build #13 - thinline ST with spalted maple veneer. (Build diary here - https://www.buildyourownguitar.com.a...ad.php?t=11695)

I went with tobacco brown on the back and vintage amber on the veneer. I also hit the neck and headstock with a single coat of vintage amber and while still wet, wiped over it with a wet cloth to thin it out and smooth out the finish - the purpose of this was to give it a bit of an aged look. Coated the whole thing with many (40) layers of Tru Oil which darkened everything to some very nice tones and made it shine.

I have a lot of blue guitars. I have been inching away from Blue. But from what I see from trial in the above scrap wood the blue looks brilliant

Sent from my NE2211 using Tapatalk