Jm-1 wiring

[alex_m.847]

I’ve been trying for quite some time now to wire the JM-1 Volume knobs to the 5-way switch, but the diagram on Pitbull Guitars is very different to what is actually here. The switch has more solder points than displayed on the diagram, and after a lot of trial and error I’m completely lost. Please feel free to respond as any help will be appreciated

[colin2121]

I did a JM1L a while ago. Can you post some pictures.
There is a bit of variation in the kits.

[rogerV]

I will be getting a JMA-1 soon, so I am interesting in learning anything you guys learn.
Thanks.

[fender3x]

This seems like a popular topic at the moment. You may want to see if there is anything on this thread that will help ;-) Since the issue seems similar it might be best to combine the threads.

https://www.buildyourownguitar.com.a...ad.php?t=10771

[colin2121]

The JM baritone is similar in the wiring just the bridge pickup is a single coil instead of a humbucker.
This might also be of some help - look at the bottom of the first page.
https://www.buildyourownguitar.com.a...228#post178228