So I did some research on pickup placement and overtones and it's not a huge deal more like preference on tone and the bridge pickup would just be a little more bassy than my other guitars. I have measurements now and the distance from where the string would leave the bridge to the start of the pickup for the high e string is a little under 1.5 inches or about 32 mm. My other guitars are a little over or a little under 1 inch so less of a difference than I thought. The low E is about 4 cm or a little over 1.5 inches which is common for multiscale to have different angle pickups from the bridge but overall, it's still farther away. I Emailed Pit Bull about returns or getting a new one but I'm thinking of building it out and seeing if it makes a big difference. For replacing the pickups, I was going to get custom ones from Bareknuckle. They have custom angles for multiscale and the pickups in the kit say 16 degrees. I did see that the mounting tabs were different so I could see if they would do custom ones or if I need to widen the cavities.