I am looking at two Bridge options. Both Wilkinson - chrome or Black. I am leaning towards the black but then I might need to think about shaping another pick guard which is another think I have not done. If I do I am thinking matt black. I was hoping to go without any big pickguard but the holes were already drilled when I got the Guitar. I will also need to file the front pickup hole as the Yosemite Pup is a bit longer.
I had to move the bridge screws for the Wilkinson Bridge. I made some hardwood rounds to fill the old holes. If I did this again I would fill the old holes with epoxy.
One question for those more experienced. Should I drill out the neck holes in the body so the neck screws can pass through them without having to turn them?
Reply With Quote