I am getting close to finished, setting up strings / inntonation etc, but seems I have a poor glue join, I am getting some slight movement between the neck and body. Started with a creak and once tuned all strings I can move the neck ever so slightly.
Am think best fix is to add some screws and a plate, to firm it up - will order these or similar, however currently out of stock.
I do have an old squier strat amd thinking I might borrow these. I did buy this kit as I wanted a set neck
I this a new issue or have I missed a step somewhere when setting the neck, I used the PB supplied glue. It was clamped for over 24 hours, and I left it alone for about 4 days. I was thinking of pulling the neck off and resetting, but likely be back to same issue, I cant see what i could do different to make the joint stronger apart from using a better glue.
Posting Permissions
Reply With Quote